Meliseptol HBV Tissue Alcohol Based Surface Disinfectant Wipes Dispenser Pack

Product Overview

Meliseptol HBV Tissues are manufactured by B. Braun Melsungen AG and are part of the Meliseptol surface hygiene range used in hospital, clinic, and laboratory settings worldwide. Each wipe is pre-saturated with 1.8 g of Meliseptol rapid disinfectant solution, ensuring consistent active agent concentration across every application. The n-propanol-based formulation provides rapid antimicrobial action while the quaternary ammonium compound contributes residual surface activity after the alcohol has evaporated.

The dispenser pack format is designed for point-of-use placement in clinical areas where frequent surface disinfection is required between patient contacts. Each dispenser contains 100 individually folded wipes (145 mm x 200 mm) that can be extracted single-handed without contaminating remaining wipes. The wipes are suitable for use on alcohol-resistant non-porous surfaces including stainless steel instrument trays, examination table surfaces, diagnostic equipment housings, infusion pump exteriors, and monitor screens. They are not suitable for use on skin or mucous membranes.

Specifications

Clinical Applications

• Rapid between-patient disinfection of examination table surfaces, diagnostic instrument housings, and clinical workstation surfaces in outpatient clinics and hospital wards
• Point-of-use disinfection of infusion pump exteriors, IV pole surfaces, and patient monitor touchscreens between patient contacts in inpatient settings
• Operating theatre and procedure room surface preparation where alcohol-resistant non-porous surfaces require rapid turnaround disinfection
• Laboratory bench and equipment surface disinfection in clinical pathology, microbiology, and research laboratory environments
• Emergency department and triage area surface hygiene where high patient throughput requires fast-acting disinfection with minimal contact time
• Dental clinic operatory surface disinfection between patient appointments, including bracket table surfaces, light handles, and chair-mounted equipment

Frequently Asked Questions

What is the difference between bactericidal and virucidal contact times?

Meliseptol HBV Tissues achieve bactericidal, yeasticidal, and tuberculocidal activity within 1 minute of surface contact. Full virucidal efficacy, covering enveloped and non-enveloped viruses including norovirus and adenovirus, requires a 10-minute wet contact time. The surface must remain visibly wet for the full contact period to achieve the stated kill rates. These contact times are validated per European Norm (EN) test standards EN 13727, EN 13624, EN 14348, and EN 14476.

Can these wipes be used on skin or for hand disinfection?

No. Meliseptol HBV Tissues are formulated exclusively for non-porous, alcohol-resistant surfaces. They are not intended for use on skin, mucous membranes, or wounds. For hand hygiene, B. Braun offers dedicated hand disinfection products in the Softa-Man and Melsept product ranges. Healthcare facilities should follow WHO hand hygiene guidelines and use products approved for skin application.

Are these wipes compatible with all medical device surfaces?

The wipes are suitable for alcohol-resistant, non-porous surfaces. They should not be used on acrylic, polycarbonate, or other alcohol-sensitive plastic surfaces, as the n-propanol content may cause crazing or discolouration. Always consult the medical device manufacturer's instructions for use (IFU) regarding compatible disinfection agents before applying to sensitive equipment surfaces. B. Braun provides a material compatibility reference guide for the Meliseptol range.

What infection control standards do these wipes meet?

The wipes are tested and validated under European Norm standards for surface disinfection: EN 13727 (bactericidal), EN 13624 (yeasticidal), EN 14348 (mycobactericidal), and EN 14476 (virucidal). The product complies with the EU Biocidal Products Regulation (BPR) 528/2012. These standards are recognised by Singapore's National Environment Agency (NEA) and are consistent with MOH (Ministry of Health Singapore) infection prevention and control guidelines for healthcare facilities.

How should the dispenser pack be stored?

Store in a cool, dry location below 25 degrees Celsius, away from direct sunlight and ignition sources. The n-propanol content is flammable; keep away from open flames and heat sources. Reseal the dispenser lid tightly after each use to prevent evaporation of the disinfectant solution. Once opened, the dispenser should be used within the timeframe specified on the packaging. Check expiry date before use.